beautypg.com

Vfl 101 • setup guide (continued), Specifications, Optical specifications – Extron Electronics VFL 101 User Guide User Manual

Page 2: General

background image

VFL 101 • Setup Guide (Continued)

Extron USA - West
Headquarters

+800.633.9876
Inside USA and
Canada Only

+1.714.491.1500
+1.714.491.1517 FA

X

Extron USA - East

+800.633.9876
Inside USA and
Canada Only

+1.919.863.1794
+1.919.863.1797

FAX

Extron Europe

+800.3987.6673
Inside Europe Only

+31.33.453.4040
+31.33.453.4050 FAX

Extron Asia

+800.7339.8766
Inside Asia Only

+65.6383.4400
+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655
+81.3.3511.7656

FAX

Extron China

+400.883.1568
Inside China Only

+86.21.3760.1568
+86.21.3760.1566

FAX

Extron Middle East

+971.4.2991800
+971.4.2991880

FAX

© 2011 Extron Electronics All rights reserved.

www.extron.com

To Locate or Trace a Single Fiber Cable:

1.

After connection to the fiber cable, turn the VFL 101 on.

2.

The VFL 101 light source is visible. Locate the red light on the
other end of the fiber cable, (see illustration at right).

Specifications

NOTE:

This device is a class 2 (II) laser product. It meets the safety regulations of
IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.

Optical specifications

Number/type ................................ 1 laser emitter
Connectors ................................... (1) 1.25 mm universal connector with LC

and MU adapters

Wavelengths ................................. 635 nm

General

Power ........................................... Internal, supplied by a battery
Power consumption ...................... 1.5 VDC, 0.8 A
Batteries
Number/type ................................ 1 AAA battery (1.5 V alkaline

or 1.2 V rechargeable)

Operating time (nominal) .............. 16 hours
Temperature/humidity ................... Storage: -22 to +140 °F (-30 to +60 °C)

/ 10% to 90%, noncondensing
Operating: +14 to +122 °F (-10 to +50 °C)
/ 10% to 90%, noncondensing

Cooling ........................................ Convection, no vents
Thermal dissipation ....................... 0.5 BTU/hr
Enclosure type .............................. Plastic
Enclosure dimensions.................... 2.8" H x 1.4" W x 0.6" D (7.1 cm H x 3.6 cm W x 1.5 cm D)

(Excluding connectors.)

Product weight ............................. 0.1 lb (<0.1 kg)
Shipping weight ........................... <1 lb (<1 kg)
Vibration ...................................... ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ........................................... EN 61010-1
EMI/EMC ...................................... EN 61000-4, EN 61326-1
Warranty ...................................... 3 years parts and labor, excluding battery

NOTE:

All nominal levels are at ±10%.

NOTE:

Specifications are subject to change without notice.

HOLD

1 sec

VFL 101

Red Glow

68-2102-01

Rev. A 06 11