Extron Electronics VGA -Show Me- Cable Setup Guide - Manual (Page 2)

VGA “Show Me” Cable • Setup Guide (Continued) VGA “Show Me” Cable • Setup Guide (Continued)
68-2214-50
Rev. D 03 12
68-2214-50
Rev. D 03 12
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only) Extron Asia
+65.6383.4400 Extron China
+86.21.3760.1568) Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040 Extron Japan
+81.3.3511.7655 Extron Middle East
+971.4.2991800 Extron India
+91.80.3055.3777
© 2012 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
Extron Headquarters
+1.800.633.9876 (Inside USA/Canada Only) Extron Asia
+65.6383.4400 Extron China
+86.21.3760.1568) Extron Korea
+82.2.3444.1571
Extron Europe
+31.33.453.4040 Extron Japan
+81.3.3511.7655 Extron Middle East
+971.4.2991800 Extron India
+91.80.3055.3777
© 2012 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
Application with SW VGA Ars Series Switchers
See the SW VGA Ars Series
User Guide for switcher
configuration.
EDID data is routed to the
display from input 1 only. All
other inputs on the switcher
do not support EDID.
REMOTE 100-240V 0.2A INPUTS
1
2
3
4
5
50-60Hz
OUTPUT OUTPUT
L R
SW6 VGA Ars
6
Extron
“Show Me”
Cables
Projector
SW6 VGA Ars
Application with Loop Daisy-chained VSW 2VGA A Series
Switchers
See the VSW 2VGA A Switcher User Guide for configuration details.
NOTES:
• Plug the “Show Me” Cable only into input 1 on the VSW 2VGA A. Input 2 does not
detect the “Show Me” Cable.
• EDID signals from each source are supported in this configuration.
In 1
Extron VGA with Audio
Cable Assemblies
Extron
“Show Me”
Cables
Out
In 2
In 1
Out
In 2
In 1
Out
Projector
VSW 2VGA A
INPUT 1
2 1
INPUT 2
VSW 2VGA A
VSW 2VGA A
INPUT 1
2 1
INPUT 2
VSW 2VGA A
VSW 2VGA A
INPUT 1
2 1
INPUT 2
VSW 2VGA A