Extron Electronics VM 700T Mounting Kit Installation - Manual (Page 4)

Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2009 Extron Electronics. All rights reserved.
VM 700T Mounting Kit Installation Guide, Continued
18. Hold the remaining cables towards the bottom of the
recess in the plastic moulding.
19. Holding the VM 700T mounting plate at a slight angle,
slide the center bar under the cables and into the recess, so
that it sits firmly at the bottom of the recess.
20. Secure the bracket to the screen, using the two screws saved from
step 11.
21. Attach the mounting plate to the bracket that was wall‑mounted in
step 2.
22 . Plug in the rear panel cables, as required.
N When the base is removed from the TLP 700TV, video connections are via BNC connectors, and there is no audio
input.
21
20
19
18