Extron Electronics RFF 054 - Manual

© 2011 Extron ® Electronics. All rights reserved. www.extron.com
Extron USA - West -
Headquarters
+800.633.9876
Inside USA/Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA/Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
68-2160-01
Rev. A
07 11
RFF 052 and RFF 054 False Plates
for 1-inch Products Installation Guide
The Extron ® False Plates for 1-inch Products increase the face height of 1-inch tall,
quarter rack width (RFF 054) or half rack width (RFF 052) products to full single rack unit
height (1U), aiding airflow management and aesthetics. Install plates as follows:
1. Clean the 1-inch tall Extron device to be rack mounted of any dust or debris.
2. Remove the protective film from the adhesive tape on the RFF 052 or RFF 054.
3. Align the plate on the top of the device so that the adhesive faces the device and the
raised side runs flush with the front panel of the device.
4. Firmly press the plate onto the device.
5. Install the 1-inch tall device to the rack shelf.
2 4 5 3