Extron Electronics Mini HR Cable BNC User Manual
Mini hr cable bnc termination instructions, Related tools and parts list
Shielding
Stripped Cable
(do not scale from illustration)
Outer
Insulation
3/32" (2.4 mm)
Conductor
3/8"
(9.5 mm)
15/32"
(11.9 mm)
1/4"
(6.4 mm)
3
Shielding
Outer
Insulation
Conductor
Ferrule
Color-coded
Heat Shrink Tube
Center
Pin
Support
Sleeve
BNC Plug Body
Mini HR Cable BNC Termination Instructions
Center Pin
4
Crimp Center Pin
Center Pin - flange flush
with edge of die
5
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
1
. Check if the correct die is installed
in the crimp tool. See the Mini-HR
profile drawing at right.
2
. Slide the color coded heat
shrink tube or BNC strain relief
over the cable, then slide the
ferrule over the cable.
3
. Carefully strip the end of
the coaxial cable to
expose the shielding and
conductor, as shown at
right.
4
. Insert the conductor into
the center pin.
Mini HR Die
68-668-01
Rev. A
05 02
Printed in the USA
Crimp Ferrule
8
BNC Plug Body
6
7
5
. Insert the conductor and pin
into the crimp tool. With the
flange on the center pin flush
with the edge of the die, use
the die’s smaller chamber to crimp the center pin.
6
. Insert the center pin into the BNC plug body
and slide the exposed shielding
over the support sleeve of the
BNC.
7
. Slide the ferrule over the
shielding and against the
BNC body.
8
. Use the die’s larger chamber
to crimp the ferrule.
9
. Slide and set the heat shrink
tube or BNC strain relief over the ferrule.
Heat shrink tube
Install strain relief
Recommended
glue
or
9
Related tools and parts list:
Crimp tool/mini HR die .................. 100-045/100-009-01
BNC-5/6 Mini HR cable, bulk, 1000’ ....... 22-020/128-03
Plenum BNC-5/6 Mini HR cable, bulk, 1000’ ..................................................... 22-103/130-03
BNC Male Mini HR crimp connectors (qty. 50) ......................................................... 100-074-51
R, G, B, Y, black, or assorted strain reliefs (qty. 50) ...................... 70-089-01, 02, 03, 04, 05, 07