Extron Electronics MSW 4V rs User Guide - Manual (Page 15)

Control Software
Universal Switcher Control Program
The Windows
®
-based Extron Universal Switcher Control Program provides an alternative to
configuring and operating the switcher through the front panel or SIS commands . The
program is compatible with Windows 2000 or later versions of the Windows operating
system.
Installing the Software
The control program can be downloaded from the Extron Website and is on the Extron
Software Products DVD. Install the software from the DVD as follows:
1. Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run Launch.exe from the disc. The Extron software DVD window
appears.
Figure 9. Extron Software DVD Opening Screen
2. Click the Software icon.
3. Scroll to the Universal Switcher Control program and click the Install link at right.
Figure 10. Universal Switcher Install Link
By default, the Windows installation creates a C:\Program Files\Extron\UnivSW folder
and places a Universal Switcher icon onto the desktop.
Visit the Extron Web site (
www.extron.com/download ) if the disk is unavailable for
installation or to check if new software is available.
MSW 4V rs and MSW 4SV rs • Control Software 9