Extron Electronics MPS 112_112CS User Guide - Manual (Page 33)

5-5 MPS Series • Programmer’s Guide
PRELIMINAR
Y
Command ASCII Command Response Description
(host to switcher) (switcher to host)
Mic level
Specify gain 16* X4 G Aud X4 X4 = audio gain in dB = 0 to 12.
This variable is a positive
number.
Specify attenuation 16* X5 g Aud X5 X5 = attenuation in dB = 1 to 66.
This variable is a positive
number.
View mic volume 16G/g X6 X6 = overall mic gain/
attenuation between -66 dB and
+12 dB. This response variable
indicates attenuation as a
negative number and gain as a
positive number.
Mic on/off
Turn mic on/off X3 M/m Mix X3 Toggles mic on or off.
X3 : 0 = off, 1 = on.
View mic status M/m X3 Mic status is (0=off, 1=on).
Front panel security lockout (executive mode)
Lock front panel access 2X/x Exe 2 Locks volume, mic, input
selection.
Lock front panel mic controls 1X/x Exe 1 Locks mic controls.
Unlock front panel access 0X/x Exe 0 Unlocks front panel.
System reset (to factory defaults)
Reset switcher to factory defaults Esc ZXXX Zpx Resets the system to the
following factory defaults:
Mode
X7 = 1
Input X11 = 1
Main Volume = 70
Mic Volume X4 = 0
Executive Mode X3 = 0
Mic threshold X8 = 8
Follow Sub Mode X3 = 0
Mic Power X3 = 0
Ducking Level X12 = 6
Request information
Request information I/i Mod X7 1G X2 2G X2 3G X2 4G= X1 G X2
Displays which input in each
group is selected and which
input is routed to program
audio output.
X7 1 = Single Switcher mode,
2 = Separate Switcher mode
X1 = Group 1 through 3
(1 = VGA, 2 = S-video,
3 = composite video).
X2 = Inputs 0 through 4 for
each group (input 0 = off).
Switcher-
initiated
messages
X
X
X
X
X