Front view, Rear view – Extron Electronics IN2116 User Manual

Page 12

IN2116 FRONT PANEL CONNECTORS AND CONTROLS

HORIZONTAL POSITION CONTROL

The location of the horizontal position control is shown above. The horizontal position control adjusts the
position of the image on the data display device from left to right (it has no effect on the local computer
monitor).

Many data projectors and monitors have their own horizontal position control, and the interaction of the
display devices and the interface’s horizontal controls may result in a dark image on the data display. The
following procedure is suggested to ensure best results:

1. Adjust the IN2116 horizontal position control so a good quality image is displayed. This control should

not be set to an extreme position.

2. Adjust the display device’s horizontal position control until the image is centered as desired.

3. If the image appears dark or the colors are not properly displayed, fine tune the controls on both the

display device and the interface until the picture is centered and a good quality image is attained.

LOCAL

MONITOR

INPUT

Power

Indicator

Local Monitor

Output (Buffered)

A/V Connector

Modules

Dip Switch

Access Underneath Unit l

Input

Connector

Stereo Audio

Input

HORIZONTAL POSITION

Horizontal Position

Control

FRONT VIEW

MAXIMUM POWER: 800W

High Resolution Video Interface

2116

OUTPUT

RED

GREEN

BLUE

HORIZONTAL/

COMPOSITE

SYNC

VERTICAL

SYNC

FUSE; 8 A; 250 V; TIME DELAY

125 VAC; 6.4 A; 47-63 HZ

MADE IN U.S.A.

TECHNICAL SUPPORT:

(714)921-4100
(800)882-7117

www.inlineinc.com

REAR VIEW