Extron Electronics AVTrac Raceway Transition - Manual (Page 2)

Extron
®
AVTrac ® Raceway Transition • User Guide (cont’d)
68‑1604‑01
Rev.
B
12 10
Extron USA - West
Headquarters
+800.633.9876
Inside USA and
Canada Only
+1.714.491.1500
+1.714.491.1517 FA
X
Extron USA - East
+800.633.9876
Inside USA and
Canada Only
+1.919.863.1794
+1.919.863.1797
FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656
FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566
FAX
Extron Middle East
+971.4.2991800
+971.4.2991880
FAX
© 2010 Extron Electronics All rights reserved. www.extron.com
7. Run cables to the AVTrac connectivity box through the raceway transition and the
wall‑mounted raceway.
8. Reattach the front plate of the raceway transition, using the screws retained from
step 2. The front plate of the Wiremold version has a top edge that sits in front of the
wall‑mounted raceway.
9. Fix the AVTrac cover track in place (see the AVTrac User Guide).
NOTE: The AVTrac top track runs up to the front edge of the raceway transition; the
bottom track runs all the way to the wall, under the raceway transition. When
measuring and cutting the top track, remember to account for the depth of the
raceway transition (2.5 inches or 6.4 cm. for the Wiremold version; 3.5 inches or
8.9 cm. for the Euro Channel version).
10. Finish off installing the AVTrac as described in the AVTrac User Guide.
11. Finish off installing the wall‑mounted raceway following the instructions provided by
the manufacturer.