Extron Electronics BUC 202 User Guide - Manual (Page 12)

5. To remove the BUC 202 from the ZipClip 200 mounting clip, press down on the locking
tab (1) while lifting up on the unit (2).
BUC 2 02
1
2
Under-Furniture Mounting
BUC 202
ZipClip 200
2
100 -24 0V 50 /60 Hz
0.2A M AX
1
1 2 TRIM
OUT PUT S BU C 20 2
15 18 0
21
36 9 12
-15 -18- 21
-3 -6 -9 -12
15 18
0
21
36 9 12 -15 -18- 21
-3 -6 -9 -12
1 2 INP UTS Furniture Mounted
1
2
Figure 8. BUC 202 Under-Furniture Mounting
NOTE: The ZipClip is shipped with a set of four wood screws.
1. Attach the ZipClip to the furniture using two or more wood screws (1). Make sure the
clip is oriented with the appropriate side facing the mounting surface and with the tab
accessible from the front of the furniture.
2. Insert the bottom of the BUC 202 into the clip, starting with one end (2).
3. Pivot the other end of the unit toward the clip and press until the BUC 202 snaps into
place.
BUC 202 User Guide • Mounting 8