John Wood Takagi - 710 - Manual (Page 18)

18
In a Multi-Unit system, connect the “[3] connector” and the
“[4] connector” with the communication cable.
Wire [3] (Male Adapter) and
[4] (Female Adapter)
The Comunication Cables are
included with the 710. The
Cables use 18 gauge wire
and can be up to 76.2m
(250 ft.) long.
Please refer to the Multi-unit Controller manual for further
instructions of the Multi-Unit system.
7-Seg LED
Left bank of
DIPswitches
Right bank of
DIPswitches
Multi-unit con-
nectors are on
each unit’s com-
puter board.
Do not touch
the Easy Link
connectors.