John Wood Oil-Fired Direct Vent - Manual

GSW WATER HEATING COMPANY
A Division of GSW Inc.
599 Hill Street West, Fergus, Ontario N1M 2X1
INSTALLATION INSTRUCTIONS
FOR
THROUGH-THE-WALL
VENTING COMPONENTS
These instructions apply for the
installation of the venting duct
including the outdoor vent terminal
for the JWF307V “Through-The-Wall”
Vented Oil Fired Water Heater.
The general installation instructions in
the manual, No. 62662 for GSW
Oil Fired Water Heaters apply, with the
exception of the applicable section
under “Venting” and the method for
“Air Adjustment”.
The instructions contained herein
must be followed in its place.
Refer to the following diagram for the
identification of the vent components:
(Fig 1.)
NOTE: THE VENT COMPONENTS
MUST BE USED AS SUPPLIED
WITHOUT ANY ALTERATION.
63371
GSW Inc.