Bell & Gossett P86109C Close Coupled Centrifugal Pumps - Manual (Page 2)

2
SAFETY
INSTRUCTIONS
This safety alert symbol will be used in this manual and on the
pump safety instruction decals to draw attention to safety re-
lated instructions. When used the safety alert symbol means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN A
SAFETY HAZARD.
Your pump should have the following safety instruction decals
located approximately as shown. If the decals are missing or are
illegible contact your local representative for a replacement.
Additional Safety Requirements:
1. Electrical connections to be made by qualified Electrician in
accordance with all National, State and Local codes.
2. Motor must have properly sized starter with properly sized
heaters to provide overload and undervoltage protection.
3. If pump, motor or piping are operating at extremely high or
low temperatures, guarding or insulation is required.
4. The maximum working pressure of the pump is listed on the
pump nameplate, do not exceed this pressure.
DESCRIPTION
This centrifugal pump is a close coupled pump which
features – high efficiency, rugged construction, foot mounted
motor. These features make installation, operation and service
easy to perform.
PUMP APPLICATION
This centrifugal pump’s bronze fitted construction make it ideal
with service with the following liquids: fresh water, general
pumping and benign liquids.