Xylem COND3110 HANDHELD CONDUCTIVITY METERS - Manual (Page 31)

Cond 3110 Maintenance, cleaning, disposal
31 ba75792e02 11/2008
5 Maintenance, cleaning, disposal
5.1 Maintenance
The only maintenance activity required is replacing the batteries.
Note
See the relevant operating manuals of the measuring cells for
instructions on maintenance.
5.1.1 Replacing the batteries
Note
Alternatively, you can also use Ni-MH rechargeable batteries (type
Mignon AA). In order to charge the batteries, an external charging
device is required.
1 Unscrew the two screws (1) on the underside of the meter,
2 Open the battery compartment (2) on the underside of the
meter.
3 Remove the four batteries from the battery compartment.
4 Place four new batteries (type Mignon AA) in the battery
compartment.
2
1