Xylem COND3110 HANDHELD CONDUCTIVITY METERS - Manual (Page 21)

Cond 3110 Operation
21 ba75792e02 11/2008
Calibration evaluation After the calibration, the meter automatically evaluates the current
status. The evaluation appears on the display.
Downloading calibration
data
You can download the calibration data.
4.3.2 Using the last calibrated cell constant
Precondition A valid calibration must be available (see section 4.3.1).
Display Cell constant [cm
-1
]
You are working with a
correctly calibrated measuring
cell.
in the range
0.450 ... 0.500 cm
-1
0.800 ... 0.880 cm
-1
E3
Eliminate the error according to
chapter 6 W
HAT TO DO IF ...
outside the ranges
0.450 ... 0.500 cm
-1
or
0.800 ... 0.880 cm
-1
1 Press
_
> to display the calibration data.
The calibrated cell constant is displayed.
1 Press repeatedly until USE CELL is displayed.
2 Press or
_
> to confirm the selection of USE
CELL.
L C L E
E S U