Xylem COND3110 HANDHELD CONDUCTIVITY METERS - Manual (Page 17)

Cond 3110 Operation
17 ba75792e02 11/2008
4.2.1 Measuring the conductivity
4.2.2 Measuring the salinity
1 Perform the preparatory activities according to section 4.2.
2 Immerse the conductivity measuring cell in the test sample.
3 If necessary, scroll with until the measured parameter
with the unit mS/cm or µS/cm is displayed.
4 Wait for a stable measured value.
The AR display indicator flashes as long as the measured
value is not yet stable.
1 Perform the preparatory activities according to section 4.2.
2 Immerse the conductivity measuring cell in the test sample.
3 Using , scroll as necessary until the measured parameter
Sal is displayed.
4 Wait for a stable measured value.
The AR display indicator flashes as long as the measured
value is not yet stable.
0 5 2
0 3 5
C
°
S/cm m
nLF
TP
Tref25
AR ARng