Xylem COND3110 HANDHELD CONDUCTIVITY METERS - Manual (Page 26)

Operation Cond 3110
26 ba75792e02 11/2008
4.5 Settings
You can adapt the meter to your individual requirements. The settings
are done in the following menus:
z System settings (
_
>)
– Switch-off interval (tOff)
z Measurement settings (
_
>)
– Reference temperature (Tref25 or Tref20)
– Temperature unit (°C / °F)
– Cleaning interval (Int.C [0 ... 999])
Note
You can exit the setting menu at any time by pressing . Settings
already modified and confirmed with are stored.
4.5.1 System settings
The default setting is printed in bold.
Switch-off interval
(.OFF)
Switch-off interval (.OFF) 10, 20, 30, 40, 50 min,
1, 2, 3, 4, 5, 10, 15, 20, 24 h
1 Open the menu for system settings with
_
>.
The first system setting is displayed.
2 Set the switch-off interval with <
▲><▼>.
3 Confirm with .
The system settings are completed.
The meter switches to the measuring mode.
0 0 0 1
f f O
Time