Xylem handylab LF 11 - Manual (Page 30)

Operation handylab LF 11
30 ba75365e04 01/2011
4.4 Configuration
You can adapt the measuring instrument to your individual requirements. To
do this, the following parameters can be changed (the status on delivery is
marked in bold):
Note
You can leave the configuration menu at any time with . The parameters
that have already been changed are stored.
Reference
temperature
Reference temperature – 25 °C (TREF25)
– 20 °C (TREF20)
Display of the measured value as
conductivity or resistivity S/cm or M
Ω
1 Switch off the measuring instrument.
2 Press the key and hold it down.
3 Press the key.
The display test appears briefly on the display. t25 appears on the
display.
4 Using <V> <W>, switch between t25 and t20.
5 Confirm with . Cond appears on the display.
RCL AR ARng
Sal
/ K % TP
C °
° F
cm 1/
M cm mbar
S E Y
Sal O
Store
1 S
m
% mg/l
S/
cm
mV/pH
Baud 4
Day.Month No.
Time
Auto
LoBat nLF Cal Lin
Tref20
TDS UpH
AutoCal DIN
AutoCal TEC
Ident Year
5 2 t
Tref25