Acer Altos R701 - Manual (Page 84)

4 Configuration Software and Utilities 74
Software Updates
Your system comes with preinstalled system BIOS and BMC firmware.
Creating a Bootable Diskette
Each update diskette created must be made bootable with ROM-DOS
Ver. 6.22 or MS-DOS Ver. 6.22.
Note: It is recommended that the target system be booted with
the Resource CD that accompanied the product. However, the
process for making the diskettes is the same for all the compatible
versions of DOS. ROM-DOS Ver. 6.22 is included on the Resource
CD.
1 Insert and boot to the Resource CD.
2 Exit from the menu to a DOS prompt.
3 Insert a diskette into the floppy drive.
4 At the DOS prompt, for an unformatted diskette, type:
format a:/s
or, for a formatted diskette, type:
sys a:
5 Press Enter.
Software Update Package
1 Download the software update.
2 Print, review, and follow the instruction file (it supercedes any
other instructions).
Note: Be sure to record the current custom BIOS settings. They
will be cleared and reset to their default values during the BIOS
update portion of the operation. You will need these settings to
configure your computer at the end of the update procedure. To
record the current custom settings, boot the computer and press
F2 when you see the splash screen. Write down the current
custom settings in the BIOS Setup program.
BS811.f/cppl!!Qbhf!85!!Uvftebz-!Efdfncfs!21-!3113!!6;19!QN