Acer Altos R701 - Manual (Page 64)

4 Configuration Software and Utilities 54
Running the Adaptec SCSISelect Utility
Each host adapter includes an onboard SCSISelect configuration utility
that allows you to configure/view the settings of the host adapter and
devices in the server.
The system finds the Adaptec SCSI host adapter and displays the
message Adaptec SCSI BIOS V x.xxx where x.xxx is the version number
of the SCSISelect utility.
Pressing at this time allows you to configure the Adaptec AIC-
7XXX SCSI host adapter.
When to Run the Adaptec SCSISelect Utility
Use the SCSISelect utility to:
• Change default values
• Check and/or change SCSI device settings that may conflict with
those of other devices in the server
• Do a low-level format on SCSI devices installed in the server
Running the SCSISelect Utility
1 When this message appears on the video monitor:
<< for SCSISelect(TM) Utility!>>>
2 Press to run the utility. When the main menu for the host
adapter appears, choose the device that you want to configure-
each SCSI bus accepts up to 15 devices.
Use the following keys to navigate through the menus and submenus:
Press To
ESC Exit the utility
Enter Select an option
↑ Return to previous option
↓ Move to the next option
BS811.f/cppl!!Qbhf!65!!Uvftebz-!Efdfncfs!21-!3113!!6;19!QN