Acer Altos G301 User Manual
Page 139
127
84h
Locked key checking is over. Checking for a
memory size mismatch with CMOS RAM data next.
85h
The memory size check is done. Displaying a soft
error and checking for a password or bypassing
WINBIOS Setup next.
86h
The password was checked. Performing any
required programming before WINBIOS Setup
next.
87h
The programming before WINBIOS Setup has
completed. Uncompressing the WINBIOS Setup
code and executing the AMIBIOS Setup or WINBIOS
Setup utility next.
88h
Returned from WINBIOS Setup and cleared the
screen. Performing any necessary programming
after WINBIOS Setup next.
89h
The programming after WINBIOS Setup has
completed. Displaying the power on screen
message next.
8Bh
The first screen message has been displayed. The
2 mouse check and extended BIOS data area
allocation check next.
8Ch
Programming the WINBIOS Setup options next.
8Dh
The WINBIOS Setup options are programmed.
Resetting the hard disk controller next.
8Fh
The hard disk controller has been reset.
Configuring the floppy drive controller next.
91h
The floppy drive controller has been configured.
Configuring the hard disk drive controller next.
95h
Initializing the bus option ROMs from C800 next.
See page 129 for additional information.
96h Initializing
before
passing control to the adaptor
ROM at C800.
Checkpoint Code
Description
bb411/cppl!!Qbhf!238!!Uivstebz-!Kbovbsz!34-!3114!!3;3:!QN