Diodes DCX100NS - Manual

DS30761 Rev. 6 - 2 1 of 6
www.diodes.com
DCX100NS
© Diodes Incorporated
DCX100NS
100mA DUAL PRE-BIASED TRANSISTORS
General Descriptions
•
DCX100NS is best suited for applications where the load
needs to be turned on and off using control circuits like
micro-controllers, comparators etc. particularly at a point
of load. It features a discrete PNP pass transistor which
can support continuous maximum current up to 100 mA. It
also contains an NPN transistor which can be used as a
control switch and can also be biased using higher
supply. The component devices can be used as part of a
circuit or as stand alone discrete devices.
Features
•
Built in Biasing Resistors
•
Epitaxial Planar Die Construction
• Lead Free By Design/ROHS Compliant (Note 1)
•
"Green" Device (Note 2)
•
Ideally Suited for Automated Assembly Processes
Mechanical Data
• Case:
SOT-563
• Case Material: Molded Plastic. "Green” Molding
Compound. UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminal Connections: See Diagram
•
Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
•
Marking Information: See Page 5
•
Ordering Information: See Page 5
• Weight: 0.0035 grams (approximate)
Reference Device Type R1 (NOM) R2 (NOM) R3, R4 (NOM)
Q1 PNP 1K Ω 10K Ω ⎯
Q2 NPN ⎯ ⎯
10K
Ω
Maximum Ratings: Total Device
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Power Dissipation (Note 3) P
D
150 mW
Collector Current (using PNP as Pass Transistor) I C(max)
100 mA
Thermal Resistance, Junction to Ambient Air (Note 3) R θJA 833 °C/W
Operating and Storage Junction Temperature Range T
J
, T
STG
-55 to +150 °C
Sub-Component Device - Pre-Biased PNP Transistor
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Supply Voltage V
cc
-50 V
Input Voltage V
in
+5 to -10 V
Output Current I
c
-100 mA
Notes: 1. No purposefully added lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http:/www.diodes.com/products/lead_free/index.php.
3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; please see page 6 or as per Diodes Inc. suggested pad layout document AP02001 on
our website at http://www.diodes.com/datasheets/ap02001.pdf.
Schematic and Pin Configuration
SOT-563
Please click here to visit our online spice models database.