Diodes ZTX751 - Manual (Page 2)

ZTX751
Document number: DS36459 Rev. 3 - 2
2 of 7
www.diodes.com
July 2013
© Diodes Incorporated
ZTX751
A Product Line of
Diodes Incorporated
Absolute Maximum Ratings
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Collector-Base Voltage V
CBO
-80 V
Collector-Emitter Voltage V
CEO
-60 V
Emitter-Base Voltage V EBO
-7 V
Continuous Collector Current I
C
-2 A
Peak Pulse Current I
CM
-6 A
Thermal Characteristics
(@T
A
= +25°C, unless otherwise specified.)
Characteristic Symbol Value Unit
Power Dissipation (Note 6) P
D
1.5 W
Power Dissipation (Note 7) P
D
1 W
Thermal Resistance Junction to Ambient (Note 6) R θJA 116 C/W
Thermal Resistance Junction to Ambient (Note 7) R θJA 175 C/W
Thermal Resistance Junction to Lead (Note 8) R θJL 70 C/W
Operating and Storage Temperature Range T J, T STG
-55 to +200 C
ESD Ratings
(Note 9)
Characteristic Symbol Value Unit JEDEC Class
Electrostatic Discharge - Human Body Model ESD HBM  4,000 V 3A
Electrostatic Discharge - Machine Model ESD MM  400 V C
Notes: 6. For a through-hole device mounted at the seating plane (2.5mm lead length) with the collector lead on 25mm x 25mm 1oz copper
that is on a single-sided FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.
7. Same as note (5), except the device is mounted on minimum recommended pad layout with 12mm lead length from the bottom of package to the board.
8. Thermal resistance from junction to solder-point at the seating plane (2.5mm from the bottom of package along the collector lead).
9. Refer to JEDEC specification JESD22-A114 and JESD22-A115.