C2G 52041 TruLink VGA and PS_2 KVM - Manual (Page 14)

13
Auto Scan Mode
In addition to manually invoking Auto Scan Mode
(discussed on page 11), the 52042 also provides
hotkey invocation.
• To invoke Auto Scan Mode using hotkeys
instead of manually, enter the following
combination:
[Scroll Lock] [Scroll Lock]
[A][Enter]
• While Auto Scan Mode is in effect, ordinary keyboard
and mouse functions are suspended. You must exit
Auto Scan Mode in order to regain normal control of
their use.
• To exit Auto Scan Mode, press [Esc] or
[Spacebar]
. The KVM focus stays with the last
port that was accessed under Auto Scan Mode.