Asus WL-300g - Manual (Page 43)

3. Software
ASUS 802.11g Access Point 43
Chapter 3 - Software Configuration
Web (Common)
System Setup
Click this item on the menu to reveal a sub menu. Follow the
instructions to setup the ASUS 802.11g AP. Tips are given
when you move your cursor over each item.
Firmware Upgrade
This page reports the Flash Code (Firmware) version installed in the ASUS
802.11g AP. Periodically, a new Flash Code is available for the ASUS
802.11g APs on ASUS’s Web site. You can update the ASUS 802.11g AP’s
Flash Code using the Firmware Upgrade page under the Advanced Setup
menu of the Web Manager. If you are experiencing a problem with your
ASUS WLAN equipment, a Technical Support representative may ask you
to give your device’s Flash Code (Firmware) version.
Note: The firmware upgrade takes approximately 60 to 90 seconds.
When the firmware upgrade is completed, you will be directed to
the home page.