Asus WL-300g - Manual (Page 32)

3. Software
32 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
Wireless
Click this item on the menu to reveal a sub menu. Follow the
instructions to setup the ASUS wireless router. Tips are given
when you move your cursor over each item.
Access Control
Note: Click the “Finish” button to save your new settings and re-
start the ASUS 802.11g AP or click “Save” and restart later.
To add security, the ASUS 802.11g AP has the ability to only associate with
or not associate with wireless mobile clients that have their MAC address
entered into this page.
The default setting of “Disable” will allow any wireless mobile client to
connect. “Accept” will only allow those entered into this page to connect.
“Reject” will prevent those entered into this page from connecting.
Adding a MAC Address
To add a MAC address, enter the 12 hexadecimal characters into the white box
next to “MAC Address:” and click the Add button. The MAC address will be
placed in the control list below. Only a total of 31 MAC addresses can be entered
into this page so determine which will be the lesser; those you wish to accept or
those you wish to reject and click the appropriate “MAC Access Mode”.
Pull down menu items:
Disable (no info required)
Accept (need to input information)
Reject (need to input information)