3 post delay time [3 sec, 4 bootup numlock state [on, 5 wait for ‘f1’ if error [enabled – Asus A55M-A/USB3 User Manual
Page 69: 6 option rom messages [force bios, 7 interrupt 19 capture [postponed, 8 setup mode [ez mode, Post delay time [3 sec] -27, Bootup numlock state [on] -27, Wait for ‘f1’ if error [enabled] -27, Option rom messages [force bios] -27
Chapter 2: BIOS information
2-27
2.7.3
Post Delay Time [3 sec]
Allows you to set the POST Report wait time. This configuration only functions in Normal
Boot mode. Configuration options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec]
[8 sec] [9 sec] [10 sec]
2.7.4
Bootup NumLock State [On]
[On]
Sets the power-on state of the NumLock to [On].
[Off]
Sets the power-on state of the NumLock to [Off].
2.7.5
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.7.6
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.7.7
Interrupt 19 Capture [Postponed]
[Immediate]
Immediately capture Interrupt 19 during boot process.
[Postponed]
Postpone capture of Interrupt 19 during boot process.
2.7.8
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode]
Sets EZ Mode as the default screen for entering the BIOS setup program.