Asus P2L97-DS - Manual (Page 33)

ASUS P2L97-DS User’s Manual 33
III. INSTALLATION
Connectors
III. INST
ALLA
TION
12. Wake on LAN (3-pin WOL)
This connector connects to LAN cards with a Wake On LAN output. When the
system is in soft-off mode, LAN activity will power on the system.
Wake on LAN Connector
IMPORTANT: Requires an ATX power
supply with at least 720ma +5-volt
standby power
No connection
Ground
+5 Volt Standby
R
B
13. Ultra-Fast SCSI & Ultra-Wide SCSI Connectors (optional)
This motherboard supports an optional onboard 50-Pin Ultra-Fast SCSI connec-
tor for 8-bit SCSI devices and 68-Pin Ultra-Wide SCSI connector for 16-bit SCSI
devices.
Onboard SCSI Connectors
50-pin Fast/Narrow
SCSI Connector 68-pin Fast/Wide
SCSI Connector
R
IMPORTANT: The 68-Pin Ultra-Wide SCSI Connector is always terminated and
will only work as an end device.
motherboard is an end device
and has permanent termination
Wide SCSI
device
SCSI devices “in-between”
must not be terminated
Wide SCSI
device Wide SCSI
device (end)
last SCSI device
must be terminated
R
NOTE: Up to 15 devices can be connected with 50-Pin Fast-SCSI and 68-Pin
Ultra-Wide SCSI combined.