Asus P5KPL/EPU - Manual (Page 51)

ASUS P5KPL/EPU 2-11
SB Over Voltage [Auto]
Allows you to manually set ICH chipset voltage or Auto for safe mode.
Configuration options: [Auto] [1.5V] [1.6V]
NB Over Voltage [Auto]
Allows you to manually set MCH chipset voltage or Auto for safe mode.
Configuration options: [Auto] [1.30V] [1.35V] [1.40] [1.45]
CPU Vcore Over Voltage [Auto]
Allows you to manually set FSB termination voltage or Auto for safe mode.
Configuration options: [Auto] [0MV] [50MV] [100MV] [150MV]
Memory Over Voltage
Allows you to set the Memory Over Voltage. Use +/- to adjust the voltage. The increment is
0.00625V. The standard value is 1.85000V.
Configuration options: [Auto] [Min = 1.850000V] [Max = 2.24375V]
The Module Version and USB Devices Enabled items show the auto-detected values. If no
USB device is detected, the item shows None.
2.4.2 USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press to display the configuration options.
USB Functions [Enabled]
Allows you to disable or enable the USB functions. Configuration options: [Disabled]
[Enabled]
[8 USB Ports]
USB 2.0 Controller [Enabled]
Allows you to enable or disable USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for Legacy USB storage devices, including USB
flash drives and USB hard drives. Setting to [Auto] allows the system to detect the presence
of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled. Configuration options: [Disabled]
[Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed
(12Mbps). Configuration options: [FullSpeed] [HiSpeed]