Asus Hummingbird - Manual (Page 90)

6-4 Chapter 6: Driver installation
6. Locate the RAID driver and place a blank, high-density floppy disk to the
floppy disk drive.
7. Press .
8. Follow screen instructions to create the driver disk.
To create a RAID driver disk in Windows ® environment
1. Start Windows ® .
2. Place the motherboard support DVD into the optical drive.
3. Go to the Make Disk menu, and then select the type of RAID driver disk you
want to create.
4. Insert a floppy disk into the floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
To create a RAID driver disk in Red Hat ® Enterprise Linux server environment
1. Insert a blank formatted high-density floppy disk to the floppy disk drive.
2. Type dd if=XXX.img of=/dev/sda to decompress the file into the floppy
disk from the following path in the support DVD:
\Drivers\MARVELL 88SE6121 SATA RAID\Driver\makedisk\Linux\RAID
3. Eject the floppy disk.