Asus Hummingbird - Manual (Page 69)

ASUS Hummingbird 4-25
Power On By PS/2 Mouse [Disabled]
Allows you to enable or disable the Power On by a PS/2 mouse. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
4.6.6 Hardware Monitor
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
Hardware Monitor
CPU1 Temperature(PECI) [ 35ºC/ 94ºF]
MB1 Temperature [ 30ºC/ 86ºF]
FAN Speed Control [Generic Mode]
FRNT FAN1 Speed [2410RPM]
FRNT FAN2 Speed [N/A]
FRNT FAN3 Speed [N/A]
REAR FAN1 Speed [N/A]
REAR FAN2 Speed [N/A]
VCORE1 Voltage [ 1.052 V]
+3.3V Voltage [ 3.246 V]
+5V Voltage [ 5.196 V]
+12V Voltage [12.000 V]
VBAT Voltage [ 3.126 V]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
CPU1 Temperature
CPU1/MB1 Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
component and CPU temperatures. Select [Ignored] if you do not wish to display
the detected temperatures.
Fan Speed Control [Generic Mode]
Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan
speeds for more efficient system operation.
Configuration options: [Full Speed Mode] [High Density Mode] [Generic Mode]
[Whisper Mode]
FRNT Fan1–3 Speed [xxxxRPM] or [Ignored] / [N/A]
REAR Fan1/2 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the speed of
front fans and rear fans in rotations per minute (RPM). If the fan is not connected to
the motherboard, the field shows [N/A].
VCORE1, +3.3V Voltage, +5V Voltage, +12V Voltage, VBAT Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select [Ignored] if you do not want to detect this
item.