beautypg.com

2 uncore configuration, 3 onboard device configuration, 4 usb configuration – Asus P7H55/USB3 User Manual

Page 57: Uncore configuration -17, Onboard device configuration -17, Usb configuration -17

background image

ASUS P7H55/USB3

2-17

C State package limit setting [Auto]

This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We

recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode

supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]

2.5.2

Uncore Configuration

The Uncore Configuration menu allows you to change the advanced chipset settings.

Memory Remap Feature [Enabled]
[Disabled] Do not allow remapping of memory.
[Enabled] Allows for the segment of system memory that was previously overwritten

by PCI devices to be remapped above the total physical memory.

2.5.3

Onboard Device Configuration

HDA Controller [Enabled]

[Enabled]

Enables the High Definition Audio Controller.

[Disabled]

Disables the controller.

Front Panel Type [HD Audio]
[AC97]

Set the front panel audio connector (AAFP) mode to legacy AC’97

[HD Audio] Set the front panel audio connector (AAFP) mode to high-definition audio.

Realtek LAN1 [Enabled]

[Enabled]

Enables Realtek LAN Controller.

[Disabled]

Disables Realtek LAN Controller.

LAN Boot ROM [Disabled]
This item appears only when you enable the previous item(s).
[Disabled] Disables Realtek LAN Boot ROM.
[Enabled] Enables Realtek LAN Boot ROM.

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Onboard USB 3.0 Controller [Enabled]

[Enabled]

Enables the USB 3.0 controller.

[Disabled]

Disables the controller.

2.5.4

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press to display the configuration options.

The USB Devices Enabled item shows the auto-detected values. If no USB device is

detected, the item shows None.