Chapter 3 – Asus MAXIMUS VI GENE User Manual
Page 95
![background image](/manuals/302622/95/background.png)
ASUS MAXIMUS VI GENE
3-9
Chapter 3
When the CPU Core Ratio is set to [Per Core], the following item appears:
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
2-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 2-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto].
Internal PLL Overvoltage [Auto]
Allows you to enable the internal PLL voltage for K-SKU CPUs to get the extreme
overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]
The DRAM speed is set to its optimized settings.
[100:100]
The CPU bus speed to DRAM speed ratio is set to 100:100.
[100:133]
The CPU bus speed to DRAM speed ratio is set to 100:133.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK / CPU StrapFrequency item settings.