Asus MAXIMUS VI GENE - Manual (Page 168)

4-20 Chapter 4: Software support
Chapter 4
4.4.7 USB Charger+
USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item in the BIOS. To do
this, go to Advanced > APM > ErP Ready in the Advanced mode then set this item to
[Disabled].
USB Charger+ is available only in selected motherboard models.
Launching USB Charger+
To launch USB Charger+, click or tap on the top-right corner of the AI Suite 3 main
menu, then select USB Charger+.
Using USB Charger+
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 2.3.1 Rear I/O connection of your user manual for more details.
• USB Charger+ does not support USB hubs, USB extension cables, and generic USB
cables.
• USB Charger�� may not recognize some ASUS devices due to varying design.
Click or tap to detect the connected USB device
Click or tap
to apply the
settings
Click or tap to
disregard the
settings
Click or tap to
fast-charge your
USB device
Indicates that the
connected USB
device is in charging
mode
Click or tap to stop
charging your USB
device
Click or tap to select the type of USB device
that you wish to charge when the system is off