3 chipset, North bridge configuration, Configure dram timing by spd [enabled – Asus P5QL-CM User Manual
Page 74: Initiate graphic adapter [peg/pci
2-24
Chapter 2: BIOS setup
2.4.3
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
South Bridge Configuration
Configure North Bridge
features.
North Bridge Configuration
North Bridge Chipset Configuration
Memory Remap Feature
[Enabled]
Configure DRAM Timing by SPD
[Enabled]
Initiate Graphic Adapter
[PEG/PCI]
IGD Graphics Mode Select
[Enabled, 32MB]
GTT Graphics Memory Size
[No VT mode, 2MB]
DVMT Mode Select
[DVMT Mode]
DVMT Memory
[256MB]
Protect Audio Video Path Mode
[Disabled]
Options
128MB
256MB
Options
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. We recommend that you set this item to Enabled when
you install 4GB memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD. Configuration
options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD][PEG/PCI]