Asus Z9PE-D16-10G/DUAL - Manual (Page 114)

4-46 Chapter 4: BIOS setup
User Password
To set a user password:
1.
Select the User Password item and press .
2. From the Create New Password box, key in a password, then press .
3. Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press .
2. From the Enter Current Password box, key in the current password, then press
.
3. From the Create New Password box, key in a new password, then press .
4. Confirm the password when prompted.
To clear a user password:
1.
Select the Clear User Password item and press .
2. Select Yes from the Warning message window then press .
Secure Boot Menu
This item allows you to customize the Secure Boot settings.
Secure Boot Control [Enabled]
This item allows you to enable or disable the Secure Boot flow control. Configuration options:
[Disabled] [Enabled]
Secure Boot Mode [Standard]
This item allows you to select the mode of the Secure boot to change Execution policy and
Secure Boot Key management. Configuration options: [Standard] [Custom]