Asus Z9PE-D16-10G/DUAL - Manual (Page 103)

Z9PE-D16-10G Series 4-35
4.4.17 Runtime Error Logging Support
Network stack [Disable]
Enables or disables the network stack feature. Configuration options: [Disable] [Enable]
4.4.18 Network Stack
Runtime Error Logging Support [Disabled]
This item allows you to enable or disable Runtime Error Logging Support.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Runtime Error Logging Support to
[Enabled].
PCI Error Logging Support [Disabled]
Allows you to enable or disable PCI Error Logging.
Configuration options: [Disabled] [Enabled].
The following item appears only when Network stack is set to [Enabled].
Ipv4 PXE Support [Enabled]
Enables or disables the Ipv4 PXE Boot Support. If disabled, Ipv4 PXE boot option will not be
created. Configuration options: [Disabled] [Enabled].
Ipv6 PXE Support [Enabled]
Enables or disables the Ipv6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be
created. Configuration options: [Disabled] [Enabled].
IPSEC Certificate:
Support to Enables/Disables the IPSEC certificate for Ikev. Configuration options: [Disabled]
[Enabled].
IPv6 Delay Time:
Set seconds of delay before IPv6 PXE Boot. Default 0 seconds.