Asus Z9PE-D16-10G/DUAL - Manual (Page 108)

4-40 Chapter 4: BIOS setup
Erasing Settings
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation
during reset. Configuration options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
Allows you to choose options for reactions to a full Smbios Event Log. Configuration options:
[Do Nothing] [Erase Immediately]
Smbios Event Log Standard Settings
Log System Boot Event [Disabled]
Allows you to choose options to enable/disable logging of System boot event. Configuration
options: [Enabled] [Disabled]
MECI [1]
Mutiple Event Count Increment (MECI). The number of occurrences of a duplicate event that
must pass before the multiplt-event counter associated with the log entry is updated, specified
as a numeric value in the range 1 to 255.
METW [60]
Mutiple Event Time Windows (METW). The number of minutes which must pass between
duplicate log entries which utilize a multiple-event counter. The value ranges from 0 to 99
minutes.
Custom Option
Log OEM Codes [Enabled]
Enable or disable the logging of EFI Status Codes as OEM Codes (if not already converted to
legacy). Configuration options: [Disabled] [Enabled]
Convert OEM Codes [Disabled]
Enable or disable the converting of EFI Status Codes to Standard Smbios Types (Not all may
be translated).
Configuration options: [Disabled] [Enabled]
4.6.2 View Smbios Event Log
Press to view all smbios event logs.
4.6.3 View System Event Log
Press to view all system event logs.