Asus P5E3 DELUXE/WiFi-AP - Manual (Page 55)

ASUS P5E3 Deluxe/WiFi-AP@n 2-29
4. USB connectors (10-1 pin USB 78, USB 1112)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
5. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
If your chassis suppots front panel USB ports, you can attach a front panel
USB cable to these connectors. Connect the USB cable to ASUS Q-Connector
(USB, blue) first, and then install the Q-Connector (USB) to the USB connector
onboard.
P5E3 DELUXE
®
P5E3 DELUXE/WiFi-AP@n
USB 2.0 connectors
USB1112 USB78
USB+5V USB_P12- USB_P12+ GND NC
USB+5V
USB_P1
1-
USB_P1
1+
GND
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
P5E3 DELUXE
®
P5E3 DELUXE/WiFi-AP@n
IEEE 1394a connector
IE1394_2
PIN 1
GND +12V TPB1- GND TP
A1-
+12V TPB1+ GND TP
A1+