beautypg.com

10 ai clock skew for channel a [auto, 11 ai clock skew for channel b [auto, 12 ai transaction booster [auto – Asus P5E3 DELUXE/WiFi-AP User Manual

Page 90

background image

4-20

Chapter 4: BIOS setup

4.4.10 Ai Clock Skew for Channel A [Auto]

Configuration options: [Auto] [Advance 350ps] [Advance 300ps] [Advance 250ps]

[Advance 200ps] [Advance 150ps] [Advance 100ps] [Advance 50ps] [Normal]

[Delay 50ps] [Delay 100ps] [Delay 150ps] [Delay 200ps] [Delay 250ps] [Delay

300ps] [Delay 350ps]

4.4.11 Ai Clock Skew for Channel B [Auto]

Configuration options: [Auto] [Advance 350ps] [Advance 300ps] [Advance 250ps]

[Advance 200ps] [Advance 150ps] [Advance 100ps] [Advance 50ps] [Normal]

[Delay 50ps] [Delay 100ps] [Delay 150ps] [Delay 200ps] [Delay 250ps] [Delay

300ps] [Delay 350ps]

4.4.12 Ai Transaction Booster [Auto]

Configuration options: [Auto] [Disabled] [Enabled]

Relax Level [1]

This sub-item appears only when you set the Ai Transaction Booster item

to [Disabled]. Set this item to a higher level to get better compatibility. Use the

<+> and <-> keys to adjust the value. The values range from 1 to 8.
Boost Level [1]

This sub-item appears only when you set the Ai Transaction Booster item

to [Enabled]. Set this item to a higher level to get better performance. Use the

<+> and <-> keys to adjust the value. The values range from 1 to 8.

The following seven items appear only when you set the Ai Overclock Tuner

item to [Manual] and [X.M.P.] and are adjusted by typing the desired values

using the numeric keypad and press the key. Use the <+> and <-> keys

to adjust the value. To restore the default setting, type [auto] using the keyboard

and press the key.

CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 1.10000V to

1.70000V with a 0.00625V interval.

Refer to the CPU documentation before setting the CPU Vcore voltage. Setting

a high VCore voltage may damage the CPU permanently, and setting a low

VCore voltage may make the system unstable.

CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.50V to 2.78V with

a 0.02V interval.

FSB Termination Voltage [Auto]

Allows you to set the front side bus termination voltage. The values range from

1.20V to 2.48V with a 0.02V interval.