Asus Z77-A User Manual
Motherboard
Table of contents
Document Outline
- Safety information
- Product introduction
- BIOS information
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 Ai Overclock Tuner [Auto]
- 2.4.2 ASUS MultiCore Enhancement [Enabled]
- 2.4.3 Turbo Ratio [Auto]
- 2.4.4 Internal PLL Overvoltage [Auto]
- 2.4.5 Memory Frequency [Auto]
- 2.4.6 iGPU Max. Frequency [Auto]
- 2.4.7 EPU Power Saving Mode [Disabled]
- 2.4.8 OC Tuner
- 2.4.9 DRAM Timing Control
- 2.4.10 CPU Power Management
- 2.4.11 DIGI+ VRM
- 2.5 Advanced menu
- 2.6 Monitor menu
- 2.6.1 CPU Temperature / MB Temperature [xxxºC/xxxºF]
- 2.6.2 CPU / Chassis Fan 1/2 / PWR Fan Speed [xxxx RPM] or [Ignore] / [N/A]
- 2.6.3 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
- 2.6.4 CPU Q-Fan Control [Enabled]
- 2.6.5 CPU Fan Speed Low Limit [200 RPM]
- 2.6.6 Chassis1/2 Q-Fan Control [Enabled]
- 2.6.7 Chassis Fan Speed Low Limit [600 RPM]
- 2.6.8 Anti Surge Support [Enabled]
- 2.7 Boot menu
- 2.7.1 Fast Boot [Enabled]
- 2.7.2 Full Screen Logo [Enabled]
- 2.7.3 Post Delay Time [3 sec]
- 2.7.4 Bootup NumLock State [On]
- 2.7.5 Wait for ‘F1’ If Error [Enabled]
- 2.7.6 Option ROM Messages [Force BIOS]
- 2.7.7 Interrupt 19 Capture [Postponed]
- 2.7.8 Setup Mode [EZ Mode]
- 2.7.9 CSM (Compatibility Support Module)
- 2.7.10 Secure Boot
- 2.7.11 Boot Option Priorities
- 2.7.12 Boot Override
- 2.8 Tools menu
- 2.9 Exit menu
- Appendices