Asus P4-P5G41 - Manual (Page 64)

4-24 Chapter 4: BIOS setup
The Module Version and USB Devices Enabled items show the auto-detected
values. If no USB device is detected, the item shows None.
4.4.4 USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press to display the configuration options.
USB Configuration
Module Version - 2.24.3-13.4
USB Devices Enabled:
None
USB Functions [Enabled]
USB 2.0 Controller [Enabled]
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
Options
Disabled
Enabled
Options
USB Functions [Enabled]
Allows you to disable or select the different values of the USB functions.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Allows you to enable or disable USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for Legacy USB storage devices, including
USB flash drives and USB hard drives. Setting this item to [Auto] allows the
system to detect the presence of USB devices at startup. If detected, the USB
controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full
Speed (12Mbps). Configuration options: [FullSpeed] [HiSpeed]