Asus P4-P5G41 - Manual (Page 37)

3-7 ASUS P2-P5G41/P4-P5G41
5. LED connector (6-1 pin LED_CON)
This connector supports the Power and HDD activity LEDs in the system front
panel.
P5Q8L LED Connector
P5Q8L
PIN 1
PLED
+
HD_LED+
PLED
_
PLED
#
LED_CON
6. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The plugs from the power
supply are designed to fit these connectors in only one orientation. Find the
proper orientation and push down firmly until the connectors completely fit.
• DO NOT forget to connect the 4-pin ATX +12 V power plug; otherwise, the
system will not boot.
• We recommend that you use a PSU with a higher power output when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
• Ensure that your power supply unit (PSU) can provide at least the minimum
power required by your system.
P5Q8L
P5Q8L ATX Power Connectors
EATXPWR
PIN
1
+3 Volt
s
-12 Volt
s
GND
PSON#
GND GND GND
-5 Volt
s
+5 Volt
s
+5 Volt
s
+5 Volt
s
GND
+3 Volt
s
+3 Volt
s
GND +5 Volt
s
GND +5 Volt
s
GND Power OK +5V Standby +12 Volt
s
+12 Volt
s
+3 Volt
s
ATX12V
PIN 1
+12V DC
+12V DC GND
GND