Hardware setup, 2 layout contents – Asus CUW-B User Manual
Page 15
ASUS CUW-B User’s Manual
15
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN
p.18 JumperFree™ Mode (Enable/Disable)
2) VIO
p.18 I/O Voltage Setting (Normal/+3.6V)
3) AUDIO
p.19 Onboard Audio Setting (Enable/Disable) (optional)
4) CODEC
p.19 Onboard Audio Codec Setting (Enable/Disable)
5) PCI3VSEL
p.20 PCI 3Volt Setting (3 Volt/3 VSB)
6) SAFE_MD
p.20 Safe Mode (Normal/Safe Mode)
7) NO_REBOOT
p.21 Automatic Timeout Reboot (Normal/No Reboot)
8) DSW
p.22 CPU External Clock Frequency Setting
Expansion Slots
1) DIMM1, DIMM2, DIMM3
p.25 168-Pin DIMM Memory Support
2) Socket 370
p.26 Central Processing Unit (CPU) Socket
3) PCI1, PCI2, PCI3, PCI4
p.28 32-bit PCI Bus Expansion Slots
4) ISA
p.29 16-bit ISA Bus Expansion Slot
5) AMR
p.30 Audio Modem Riser Slot
Connectors
1) KB
p.31 Keyboard Connector (6-pin female)
2) FLOPPY
p.31 Floppy Disk Drive Connector (34-1 pins)
3) IDE1/IDE2
p.32 Primary/Secondary IDE Connectors (Two 40-1 pins)
4) IDELED
p.32 IDE Activity LED Lead (2 pins)
5) PARALLEL
p.33 Parallel Port Connector (25-pin female)
6) WOL_CON
p.33 Wake-On-LAN Connector (3 pins)
7) WOR
p.34 Wake-On-Ring Connector (2 pins)
8) CHA_, CPU_, PWR_FAN p.34 Chassis, CPU, Power Supply Fan Connectors (Three 3-pin)
9) MODEM, AUX, VIDEO, CD1 p.35 Internal Audio Connectors (Four 4-pins)
10) AUDIOCON
p.35 Audio Jack Header (26-1 pins)
11) SIR/CIR
p.36 Serial/Consumer IR Module Connectors (10-1 pins)
12) COM1/COM2
p.36 Serial Port Headers (Two 9-pin male)
13) SMB
p.37 SMBus Connector (5-1 pins)
14) DFP
p.37 Digital LCD Header (20 pins) (optional)
15) VGA
p.38 Monitor (VGA) Output Header (16-pin male)
16) MIC2
p.38 Internal Microphone Connector (3 pins)
17) HPHONE
p.38 True-Level Line Out Header (3 pins)
18) CHASSIS
p.39 Chassis Intrusion Connector (2 pins)
19) USBMIR
p.39 USB / IR / PS/2 Mouse Module Header (18-1 pins)
20) ALERT
p.40 Alert-On-LAN (3 pins)
Layout Contents
3. H/W SETUP