Asus P2L-B - Manual (Page 15)

ASUS P2L-B User’s Manual 15
III. INSTALLATION
Jumper Settings
1. Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your
computer, (4) Hold down during bootup and enter BIOS setup to re-
enter user preferences.
RTC RAM CLRTC
Clear Data [short solder points momentarily]
R
P2L-B Clear RTC RAM
CLRTC
2. Keyboard Power Up (KBPWR)
Set this jumper to Enable if you wish to use your keyboard to power up your
system. Requires an ATX power supply that can supply at least 300mAmp on
the +5VSB lead and new BIOS support. The default is set to Disable because
your system will not function without the proper ATX power supply.
Setting KBPWR
Disable [1-2] (default)
Enable [2-3]
R
P2L-B Keyboard Power Up
Disable
(Default)
KBPWR KBPWR
1 2 3
Enable
1 2 3
III. INST
ALLA
TION
(Jumpers)