Asus CUV4X-ME - Manual (Page 39)

ASUS CUV4X-ME User’s Manual 39
3. HARDWARE SETUP
Connectors
3. H/W SETUP
The following PANEL illustration is used for items 21–26 (next page).
CUV4X-ME System Panel Connectors
* Requires an ATX power supply.
PLED
Ground
MLED
PWR_SW
+5 V +5V SPKR
Ground
+5 V
ExtSMI#
ResetCon
Ground Ground
Reset SW
Power LED
ATX Power Switch*
Message LED
SMI Lead
Speaker
Connector
Ground
®
CUV4X-ME
20) SMBus Connector (5-1 pin SMB)
This connector allows you to connect SMBus (System Management Bus) de-
vices. SMBus devices communicate by means of the SMBus with an SMBus
host and/or other SMBus devices. SMBus is a specific implementation of an I
2 C
bus, which is a multi-device bus; that is, multiple chips can be connected to the
same bus and each one can act as a master by initiating data transfer.
SMBCLK
Ground
SMBDA
T
A
+5V
1
CUV4X-ME SMBus Connector
SMB
®
CUV4X-ME