Asus Z7S WS - Manual (Page 91)

ASUS Z7S WS 4-21
Serial.Port1.Address.[3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
J-Micro.eSATA/PATA.Controller.[Enabled]
Allows you to enable or disable the J-Micro eSATA/PATA controller.
Configuration options: [Enabled] [Disabled]
Controller Mode [IDE]
This sub-item appears only when you set the J-Micro.eSATA/PATA.
Controller item to [Enabled] and allows you to select the J-Micro eSATA/
PATA controller mode.
Configuration options: [RAID] [IDE] [AHCI]
Front.Panel.Support.Type.[AC97]
This item allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front panel
audio module supports.
Configuration options: [AC97] [Azalia]
Onboard.1394.[Enabled]
Allows you to enable or disable the onboard IEEE 1394 controller.
Configuration options: [Enabled] [Disabled]
Onboard.LAN.[Enabled]
Allows you to hide or active the onboard LAN.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Allows you to configure the onboard LAN Boot ROM.
Configuration options: [Disabled] [Enabled]
PCI.Express.x1.[Auto]
Allows you to enable or disable the onboard PCI Express x1 slot.
Configuration options: [Auto] [Disabled]
Primary.Display.Adapter.[PCI-E]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI-E] [PCI]
PCIe.Link.Speed.[Auto]
Allows you to select the PCI Express link speed.
Configuration option: [Auto] [PCIe Gen1]