Asus Z7S WS - Manual (Page 54)

2-32 Chapter 2: Hardware information
4.. USB.connectors.(4-pin.USB6,.10-1.pin.USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to
these connectors, then install the module to a slot opening at the back of the
system chassis. This USB connector complies with USB 2.0 specification that
supports up to 480 Mbps connection speed.
The USB port module is purchased separately.
USB+5
V
USB_P8
-
USB_P8
+
GND NC
USB+5
V
USB_P7
-
USB_P7
+
GND
Z7S WS USB connectors
USB78
USB6
Z7S WS
®
You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!