38 chapter 2: hardware information, Z7s ws analog front panel connector aafp – Asus Z7S WS User Manual
Page 60
2-38
Chapter 2: Hardware information
12.. Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard’s high-definition audio
capability.
• By default, this connector is set to [AC97]. If you want to connect an HD
front panel audio module to this connector, set the
Front.Panel.Support.
Type item in the BIOS setup to [Azalia]. See section 4.4.4.Onboard.
Devices Configuration for details.
Z7S WS Analog front panel connector
AAFP
HD-audio-compliant
pin definition
Legacy AC’97
compliant definition
POR
T1
L
POR
T1
R
POR
T2
R
SENSE_SEND
POR
T1
L
GND
PRESENCE
#
SENSE1_RETUR
SENSE2_RETUR
MIC2
MICPWR
Line out_R
NC
Line out_L
AGND
NC
NC
NC
HD-audio-compliant
pin definition
Legacy AC’97
compliant definition
POR
T1
L
POR
T1
R
POR
T2
R
SENSE_SEND
POR
T1
L
GND
PRESENCE
#
SENSE1_RETUR
SENSE2_RETUR
AGND
NC
NC
NC
13.. Optical.drive.audio.connector.(4-pin.CD)
These connectors allow you to receive stereo audio input from sound sources
such as a CD-ROM, TV tuner, or MPEG card.
Z7S WS Internal audio connector
CD
Right
Audio Channel
GND
GND
Left
Audio Channel