Asus M4A88TD-M EVO/USB3 - Manual (Page 66)

2-18 Chapter 2: BIOS information
2.4.14 HT Voltage [Auto]
Allows you to set the HyperTransport voltage. The values range from 1.20000V to 1.40000V
with a 0.01000V interval.
2.4.15 NB Voltage [Auto]
Allows you to set the Northbridge voltage. The values range from 1.10000V to 1.50000V with
a 0.01000V interval.
2.4.16 NB 1.8V Voltage [Auto]
Allows you to set the Northbridge 1.8V voltage. The values range from 1.80V to 1.90V with a
0.10V interval.
2.4.17 SB Voltage [Auto]
Allows you to set the Southbridge voltage. The values range from 1.10V to 1.40V with a
0.10V interval.
2.4.18 SidePort Memory Voltage [Auto]
Allows you to set the SidePort memory voltage. The values range from 1.50V to 1.80V with a
0.10V interval.
• Setting the above voltages to a high level may damage the CPU, memory module, and
chipset permanently. Proceed with caution.
• The system may require a better cooling system to work stably under high voltage
settings.
2.4.19 CPU Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode.
Configuration options: [Auto] [Disabled] [Enabled]
2.4.20 CPU/NB Load-Line Calibration [Auto]
Allows you to select the CPU/NB Load-Line mode.
Configuration options: [Auto] [Disabled] [Enabled]
2.4.21 PCI/PCIe CLK Status [Enabled]
Allows you to enable and disable clock for PCI/PCIe slot.
Configuration options: [Disabled] [Enabled]